CFD Online Logo CFD Online URL
Home > Forums > FLUENT

Skewness correction

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   November 7, 2015, 16:06
Default Skewness correction
Senior Member
Join Date: Nov 2013
Location: Iran
Posts: 216
Rep Power: 5
aja1345 is on a distinguished road

I am simulating a turbine in Fluent that it has curve. Mesh is structure completely. but there is high Skewness in tip clearance and some parts of around of the blade.

when i use SIMPLEC Method, one factor (Skewness correction) appear under the SIMPLEC method in ANSYS Fluents method.
How i must adjust this factor? i dont know which number must be set?1< or 1 , 2, 3,

I used K-e turbulence model and when I set Skewness correction to 5 or 20, the following error appears:

Error: Divergence detected in AMG solver: k

Error: Divergence detected in AMG solver: k
Error Object: #f

Why does this happen?

Please suggest a way to reduce the skewness in ansys fluent. And how can i check Skewness in Fluent?



aja1345 is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Production correction or curvature correction in the SST model Ang CFX 2 May 20, 2014 20:50
Mesh skewness correction stainboy OpenFOAM Running, Solving & CFD 4 November 27, 2013 11:09
skewness correction sara22 FLUENT 2 September 1, 2013 07:03
[ICEM] High Skewness m5edr ANSYS Meshing & Geometry 5 June 28, 2013 03:01
Severe nonorthogonality and severe skewness problem qtian OpenFOAM Running, Solving & CFD 2 January 22, 2008 19:47

All times are GMT -4. The time now is 18:48.