|
[Sponsors] |
February 22, 2016, 09:00 |
Help in choosing results
|
#1 |
New Member
Chang Yi
Join Date: Feb 2016
Posts: 3
Rep Power: 10 |
Hi
I have started using CFD Fluent for my current project on marine propellers and I am comparing between ducted and non ducted propellers. I have done 1 calculation run with my CFD program but I do not know what results I should be comparing for the 2 propellers. I am trying to compare the efficiencies and also cavitation models of the 2 propellers. Much help need thanks ! |
|
February 22, 2016, 10:20 |
|
#2 |
Senior Member
Cees Haringa
Join Date: May 2013
Location: Delft
Posts: 607
Rep Power: 0 |
Hi Chang,
You will have to decide that on the basis of your problem, and the parameters that you are interested in. Say, for example, I have a stirred vessel and want to study cooling at the wall. I will then export parameters on the heat transfer at that wall, and, to see how cooling relates to the flow, export the velocity profiles/vectors in certain key regions. Perhaps the temperature profile as well, to get insight in the homogeneity. Now, I have little experience with propellers, but I can imagine you check: the wake of the propellers (velocity, pressure profiles in a cross-section perpendicular to the impeller), the torque of the impeller, perhaps strains rates and turbulence profiles. if you have experimental data available for validation of your results, of course let this data guide you in your choices. Cheers! Cees |
|
February 22, 2016, 10:41 |
|
#3 |
New Member
Chang Yi
Join Date: Feb 2016
Posts: 3
Rep Power: 10 |
Hi
Thank you so much for the help ! cheers |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
OpenFOAM - Validation of Results | Ahmed | OpenFOAM Running, Solving & CFD | 10 | May 13, 2018 18:28 |
lid driven cavity varying results | yasmil | OpenFOAM Running, Solving & CFD | 2 | October 6, 2016 21:42 |
interFoam simulation yields inconsistent results for alpha1 surface | Ralinus | OpenFOAM Running, Solving & CFD | 8 | January 13, 2014 08:54 |
CFD results not close to experimental results | cider | STAR-CCM+ | 0 | July 8, 2013 07:53 |
Different Results from Fluent 5.5 and Fluent 6.0 | Rajeev Kumar Singh | FLUENT | 6 | December 19, 2010 11:33 |