Viewing Monitor Results After Closing Solution

DannyS93 · March 5, 2016, 06:13

Hi guys,

I've been studying the drag coefficient on a vehicle using fluent Ansys, after doing initial testing and getting a value close to what I wanted using the drag monitor (plotting, printing and writing) I closed the solution part of the study to look at the results. However I now can't seem to find my results or graph I plotted for Cd anywhere!

I've been looking for a while and managed to re-plot the residuals, however have had no luck with the Cd. Is there any way to look at the results and the graph for the solution without running the solution again?

I hope I'm not just missing something completely and making myself look silly!

Thanks,
Danny

LuckyTran · March 5, 2016, 19:45

Are you having trouble with workbench of Fluent?

In Fluent just be sure to write the data file and read it again (after you read the case file of course). There should also be a prompt to save the case and data file if you exit without first saving.

March 5, 2016, 06:13	Viewing Monitor Results After Closing Solution	#1
DannyS93 New Member Danny Join Date: Mar 2016 Posts: 1 Rep Power: 0	Hi guys, I've been studying the drag coefficient on a vehicle using fluent Ansys, after doing initial testing and getting a value close to what I wanted using the drag monitor (plotting, printing and writing) I closed the solution part of the study to look at the results. However I now can't seem to find my results or graph I plotted for Cd anywhere! I've been looking for a while and managed to re-plot the residuals, however have had no luck with the Cd. Is there any way to look at the results and the graph for the solution without running the solution again? I hope I'm not just missing something completely and making myself look silly! Thanks, Danny

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
grid dependancy	gueynard a.	Main CFD Forum	19	June 27, 2014 21:22
Why 3D solid-pore geometry showing diverged solution?	Sargam05	OpenFOAM	0	December 3, 2012 15:45
Analytic solution for 2D steady Euler equations	jojo81	Main CFD Forum	0	October 15, 2012 12:05
IcoFoam parallel woes	msrinath80	OpenFOAM Running, Solving & CFD	9	July 22, 2007 02:58
Wall functions	Abhijit Tilak	Main CFD Forum	6	February 5, 1999 01:16

March 5, 2016, 19:45		#2
LuckyTran Senior Member Lucky Join Date: Apr 2011 Location: Orlando, FL USA Posts: 5,665 Rep Power: 65	Are you having trouble with workbench of Fluent? In Fluent just be sure to write the data file and read it again (after you read the case file of course). There should also be a prompt to save the case and data file if you exit without first saving.