 |
 |
 |
|
|
|
[Sponsors] | ||||
March 29, 2016, 05:48
|
Spiral spray nozzle
|
#1 |
|
New Member
Join Date: Mar 2016
Posts: 3
Rep Power: 10  |
Can anyone guide me how i can model spiral spray model in Fluent or CFX. whats steps i have to follow in set up so that i can obtain droplet size in results. waiting for response.
|
|
|
|
|
|
March 29, 2016, 05:52
|
|
#2 |
|
New Member
Join Date: Mar 2016
Posts: 3
Rep Power: 10 |
can anyone guide how i can use discrete phase model step by step for spiral spray nozzle? i am using this model but i am facing a problem what is meant by incomplete and shed no of particles please guide me?
Last edited by AMB; April 6, 2016 at 02:36. |
|
|
|
|
|
|
May 4, 2016, 06:31
|
|
#3 |
|
New Member
Join Date: Mar 2016
Posts: 3
Rep Power: 10 |
Can you help me? I am beginner in Ansys Fluent. I have done detailed study of Ansys user guide. Actually I want to study droplet size, and coverage length of nozzle. From water spray nozzle, water (0.58kg/sec) sprinkles into tank. From the both side of tank, vapor (1.2kg/sec) enters into the tank. On these water drops, basically water sprinkles. Cold water enters at 298K, water vapor enters at 400K, after interaction of these phase it exits from the bottom of tank. Initially I want to solve this problem in simple way like study of interaction of phase as I attached picture here. Problem is clearly shown in figure FFF-2. Geometry diagram has been shown in FFF-1 andFFF-3. Interaction of phases should be such like that as shown in figure FFF-4. I do not understand where the problem in analysis is. Please help me. Waiting for your response.
Multiple phase: VOF (number of Eulerian phases=2) Energy equation: On Viscous Model: K-epsilon, realizable Species Model: Species Transport: options (inlet diffusion, Diffusion Energy Source): phase properties (phase water) file:///C:/Users/alvi/Downloads/FFF_1.webp file:///C:/Users/alvi/Downloads/FFF_2.webp file:///C:/Users/alvi/Downloads/FFF_3.webp file:///C:/Users/alvi/Downloads/FFF-4.webp |
|
|
|
|
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Which phase is dispersed in pre and post nozzle spray? | Torque_Converter | CFX | 6 | February 21, 2013 16:24 |
| CFD of Plasma Spray nozzle | pblee_99 | FLUENT | 0 | August 5, 2010 10:09 |
| Spray Simulation considering the nozzle flow | farbfilm | OpenFOAM Running, Solving & CFD | 0 | March 27, 2009 08:21 |
| compressible flow in a counterflow nozzle | d.vamsidhar | FLUENT | 0 | November 24, 2005 01:45 |
| water spray nozzle | Dr. Insoo Cho | Main CFD Forum | 3 | October 15, 1999 14:53 |
Linear Mode
