match 2 faces with interface

sylvain.m · June 6, 2016, 11:20

Hello everyone,

I want to move the little piece in the x direction so I need to create a real interface between the 2 pieces. The problem is that the 2 faces don't match. Fluent says that the interface correspond to the whole lower face when it's not (in blue).
For the other part, it's all right since the whole upper piece face is include in the interface it is supposed to be.
Could you help me to do this interface please?
Thank you

Far · June 6, 2016, 13:49

Quote:

Originally Posted by sylvain.m

Hello everyone,

I want to move the little piece in the x direction so I need to create a real interface between the 2 pieces. The problem is that the 2 faces don't match. Fluent says that the interface correspond to the whole lower face when it's not (in blue).
For the other part, it's all right since the whole upper piece face is include in the interface it is supposed to be.
Could you help me to do this interface please?
Thank you

split the lower face into three parts.

sylvain.m · June 7, 2016, 03:46

it's a pity there is no other solutions but thank you very much

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Decomposing meshes	Tobi	OpenFOAM Pre-Processing	22	February 24, 2023 09:23
Foam::error::PrintStack	almir	OpenFOAM Running, Solving & CFD	91	December 21, 2022 04:50
Radiation in semi-transparent media with surface-to-surface model?	mpeppels	CFX	11	August 22, 2019 07:30
[snappyHexMesh] Error snappyhexmesh - Multiple outside loops	avinashjagdale	OpenFOAM Meshing & Mesh Conversion	53	March 8, 2019 09:42
An error has occurred in cfx5solve:	volo87	CFX	5	June 14, 2013 17:44

June 7, 2016, 03:46		#3
sylvain.m New Member Sylvain Join Date: Apr 2016 Location: Belfort, France Posts: 6 Rep Power: 10	it's a pity there is no other solutions but thank you very much