# FIXED value in Fluent 4.5.2

 Register Blogs Members List Search Today's Posts Mark Forums Read

 December 29, 1999, 09:13 FIXED value in Fluent 4.5.2 #1 Risto Huhtanen Guest   Posts: n/a How to gain a FIXED temperature value in a CONDUCTIVE SOLID cell in Fluent 4.5.2 in a transient case? Here is a suggestion, but it does not work! Add to urstrm.F: #include "COEFF.INC" !definitions of coefficients in source terms of H1 equs in urstrm.F AP(L) =0.0 AXP(L)=0.0 AXM(L)=0.0 AYP(L)=0.0 AYM(L)=0.0 AZP(L)=0.0 AZM(L)=0.0 SU(L) =0.0 SP(L) =0.0 ATERM = 1.E10*(STEMP-Tref)*Cp BTERM =-1.E10 This means that all other terms from the enthaply equation for this cell are removed, except the A and B. So the cell value should be defined exactly. What a shame it does not work. Has anyone got suggestions?

 February 21, 2000, 05:11 Re: FIXED value in Fluent 4.5.2 #2 Risto Huhtanen Guest   Posts: n/a For our information: I have solved the problem with help of Mike Slack from Fluent UK. The problem was in some other place, not in these coefficients. You can take the procedure above as an advice how to fix a value in a cell in Fluent 4.

 Thread Tools Display Modes Linear Mode

 Posting Rules You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is OffTrackbacks are On Pingbacks are On Refbacks are On Forum Rules

 Similar Threads Thread Thread Starter Forum Replies Last Post emmkell FLUENT 26 June 9, 2015 15:38 dunga82 FLUENT 8 April 19, 2012 20:23 opehterinar81 FLUENT 0 August 19, 2011 11:55 ibex7 FLUENT 7 April 18, 2011 02:44 syadgar FLUENT 1 September 8, 2009 16:41

All times are GMT -4. The time now is 22:37.