CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

fluent transient simulation control

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   January 20, 2000, 12:52
Default fluent transient simulation control
  #1
Kai Kang
Guest
 
Posts: n/a
Does Fluent v5 has a capability to automatically control the time step sizes in a transient simulation?

I know FIDAP can do this, FIDAP postprocessing allows you check your solutions at any time, not limited by the solution time steps.

It seems Fluent is kind of strict on this...
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Transient conduction possible in fluent? jlefevre76 FLUENT 2 February 5, 2013 09:53
the problem of my transient simulation "Floating point exception: Overflow " alloveyou CFX 15 November 22, 2012 11:14
about transient radiations simulation waradevivek FLUENT 0 October 17, 2011 10:16
Beginning a Transient Simulation Norflow CFX 2 October 7, 2011 00:38
Synthetic (pulsatile) jet transient simulation aero CFX 0 November 6, 2009 01:10


All times are GMT -4. The time now is 16:13.