CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

volumes in gambit

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 8, 2000, 17:36
Default volumes in gambit
  #1
christof
Guest
 
Posts: n/a
Hy,

I have a lot of problems with generating volumes in gambit. If I create the volumes from surfaces I get sometimes a lot of additional vertices at the edges and some surfaces cannot be meshed anymore, so the volume cannot be meshed. Meshing the connected surfaces before creating the volume is possible and works well. I use the surface-types: mesh-surface and "surface by 4 edges". Any ideas what can be done and what the reason for this behaviour is ? Thanks a lot christof
  Reply With Quote

Old   March 9, 2000, 18:03
Default Re: volumes in gambit
  #2
Shyam Kishor
Guest
 
Posts: n/a
Though case specific, this seems like am ACIS bug where it fails to identify the correct topology. In some cases, presence of duplicate entities(faces) or complex surfaces leads to this behaviour.

The workaround is to heal the real volume or stich a virtual volume.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Can't connect volumes in Gambit villager ANSYS Meshing & Geometry 4 October 18, 2011 17:10
Handling Virtual volumes in Gambit Bharath FLUENT 4 October 30, 2006 21:24
meshing 3 connected volumes with gambit Miguel FLUENT 1 July 20, 2006 05:50
Ghosts Volumes on Gambit ?!! help please Andres D. Ortiz FLUENT 0 October 7, 2001 19:17
Gambit mesh & Negative Volumes Ashutosh FLUENT 5 February 21, 2001 01:59


All times are GMT -4. The time now is 00:41.