CFD Online Logo CFD Online URL
Home > Forums > FLUENT

Reference Value Selection

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   March 10, 2000, 09:07
Default Reference Value Selection
Alberto Schroth
Posts: n/a
I am a little confused on how to select proper reference values for my problem.

I am using Fluent 5.3, how do changes to the reference values, show under Reports->Reference Values..., effect the overall solution.

Where in the Fluent manual can I find literature on these effects.

Thanks in advance!
  Reply With Quote

Old   March 10, 2000, 17:23
Default Re: Reference Value Selection
Amadou Sowe
Posts: n/a
The reference values are for postproccessing, thus the values you specify there should not affect your solution. See the section on Reference Values under the Alphanumeric Reporting section of your Fluent 5 User's Guide. Mine is in chapter 21 section 21.7 of volume 4 with a publication date of 1998.
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Second Derivative Zero - Boundary Condition fu-ki-pa OpenFOAM 10 May 1, 2014 16:26
Error with Wmake skabilan OpenFOAM Installation 3 July 28, 2009 00:35
OpenFOAM on MinGW crosscompiler hosted on Linux allenzhao OpenFOAM Installation 127 January 30, 2009 20:08
G95 + CGNS Bruno Main CFD Forum 1 January 30, 2007 01:34
Building OpenFoAm on SGI Altix 64bits anne OpenFOAM Installation 8 June 15, 2006 09:27

All times are GMT -4. The time now is 12:23.