CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

FLUENT/GAMBIT on PC

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 9, 2000, 13:00
Default FLUENT/GAMBIT on PC
  #1
jurek
Guest
 
Posts: n/a
Hy, this subject was discussed some months ago and I read the topics, but I think that now some more people have experience with changing from workstations to PC and Linux/NT. What is your experience about: 1.) stability of WIN NT 2.) Fluent: Parallel with NT 3.) Postproc. with linux 4.)graphics with PC in general (instead of SGI) 5.) Speed PC-Workstation, what technical data can be compared ? 6.) what do you recommend: NT or linux (or NT and linux) ? Thanks a lot jurek
  Reply With Quote

Old   April 11, 2000, 12:27
Default Re: FLUENT/GAMBIT on PC
  #2
Rustbelt
Guest
 
Posts: n/a
I use GAMBIT and FIDAP on NT. They are still not very stable and somewhat tricky to use. Installation can be a problematic if you are upgrading. Most of errors on GAMBIT are not documented.
  Reply With Quote

Old   April 11, 2000, 16:47
Default Re: FLUENT/GAMBIT on PC
  #3
Aaron J. Bird
Guest
 
Posts: n/a
probably linux but I have been hearing reports that some people are getting useable results from WIN NT ... even when they're run in parallel
  Reply With Quote

Old   May 4, 2000, 01:33
Default Re: FLUENT/GAMBIT on PC
  #4
Matthew Brannock
Guest
 
Posts: n/a
No problems with Gambit or fluent on NT, although haven't run parallel yet.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Fluent/Gambit and vista richard FLUENT 14 September 20, 2011 12:20
importing gridgen msh into fluent/gambit CH FLUENT 4 November 5, 2006 22:27
ANSYS mesh to FLUENT/GAMBIT Pillai(TPU) FLUENT 7 January 2, 2006 21:59
Help: Installing Fluent/Gambit in Mandrake Linux ken FLUENT 19 April 18, 2005 17:43
Uninstall Fluent/Gambit Ogbeni FLUENT 1 January 21, 2005 18:49


All times are GMT -4. The time now is 03:55.