CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

pipes with deforming walls

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   August 14, 2000, 16:25
Default pipes with deforming walls
  #1
Tommy O Brien
Guest
 
Posts: n/a
Hi all, I am trying to model 3d flow through two 45 degree intersecting pipes using Gambit to mesh and Fidap to solve. I am using the FSI capabilities of Fidap for deforming walls and remeshing. The flow through the geometry is okay but the walls are not deforming. I think the problem may exist due to the mesh interface between the wall and the fluid. I am unsure as to the degree of linking I have to adopt between the wall mesh and the fluid mesh. Any thoughts? All comments deeply appreciated. Tommy.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] Shadow walls in Fluent. ICEM meshes vs Workbench aarvay ANSYS Meshing & Geometry 10 February 5, 2014 11:17
Deforming wall problem alxasli FLUENT 3 January 10, 2011 06:22
Flow around pipes - heat transfer coefficient on the wall of pipe doodek Main CFD Forum 2 November 23, 2009 08:48
cylindrical pipes Ben CD-adapco 4 June 16, 2004 11:25
thermal conditions of walls Stefan FLUENT 2 March 23, 2003 06:17


All times are GMT -4. The time now is 11:17.