CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

3D,Solid-Liquid simulation in stirred tank

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 23, 2000, 12:23
Default 3D,Solid-Liquid simulation in stirred tank
  #1
Mike Thai's son
Guest
 
Posts: n/a
Hi friends,

I am new in CFD but I am working with 3D simulation of mixing-tank bioreactor with 2 phases involved for the moment(water as fluid and beads as solid and the initial solid vol fraction is about 0.3)(3-phase simulation are waiting to be solved afterward).My system have 2 radial impeller with no buffle.

I used Eulerian(granular) multiphase model to investigate the suspension of beads(solid particles)by turn on the time-dependence option...... At first ,I run the simulation with Multi-reference frame(MRF). After getting the converged solution.....I check the average value of solid vol fraction....it appeared to be about zero( instead of about 0.3) which look weird.

But,then, I find the limitations of the Eulerian Multiphase model that it cannot be used with sliding or deforming meshes.(from fluent user's guide vol.2 page9-5 )

My question is..... Is the fixed velocity( as an impeller model instead of MRF or sliding mesh) become the only way I can use to deal with my simulation ??....(according to limitation I mentioned) Any more suggestion are gladly welcome.

Thank you in advance.

Mike Thai's son

  Reply With Quote

Old   June 25, 2010, 10:23
Default
  #2
New Member
 
Li Liu
Join Date: Nov 2009
Posts: 16
Rep Power: 0
commonyue is on a distinguished road
Hi, i am also working on two phase simulation now (water and glass beads),I think u can use the SG method for your simulation,but using MFR can get you steady state result, if the volume fraction is 0 instead of 0.3 using MFR, maybe there is something wrong with other parameter setting, not due tot the MFR method?...

Hope you will figure it out...

Lily
commonyue is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Problems scaling down the mesh of a stirred tank (GGI, icoDyMFoam) Tobb OpenFOAM 2 February 7, 2013 14:06
liquid decreases in bubble column E-E simulation jhchen ANSYS 1 August 3, 2010 11:49
How specified the TSS and NTS in a Stirred Tank eH FLUENT 0 November 8, 2007 22:37
compressible liquid simulation kaiser Main CFD Forum 0 October 13, 2002 05:32
simulation on stirred vessels Ray Main CFD Forum 5 August 18, 1999 19:24


All times are GMT -4. The time now is 18:02.