CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

How to define boundary condition

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   November 28, 2000, 04:18
Default How to define boundary condition
  #1
Devy
Guest
 
Posts: n/a
Hi dear all Can somebody.I am applying fluent5.4 to simulate the burning of solid fuel .Vaporizing of the fuel is primarily sustained by the rate of heat transfering from gas to the surface by conduction and radiation.The surface regression rate depends on the fuel surface temperature.Now I don't how to define the boundary condition of wall.How can I get the fuel surface temperature. I've tried everything I can imagine!!! Thanks a lot, in advance......
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
how to define two inlet boundary condition at the different time nuengao FLUENT 0 December 13, 2010 03:42
External Radiation Boundary Condition for Grid Interface CFD XUE FLUENT 0 July 9, 2010 02:53
how to define slip boundary condition in tube zhucheng1980 FLUENT 0 June 20, 2007 15:49
Free surface boudary conditions with SOLA-VOF Fan Main CFD Forum 10 September 9, 2006 12:24
Trimmed cell and embedded refinement mesh conversion issues michele OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 2 July 15, 2005 04:15


All times are GMT -4. The time now is 23:56.