CFD Online Logo CFD Online URL
Home > Forums > FLUENT

Problems with peridic B.C.

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   December 13, 2000, 13:12
Default Problems with peridic B.C.
Peter Kolb
Posts: n/a

maybe somebody can help me: I try to simulate a part of an agitated column. This part should consist a 60 angle of the flow region. For the faces edgewise I want to use rotational periodic conditions and for the inlet and oulet of the flow region I want to take translatoric conditions. Because of the stirrer I have to work with the multi reference frame (MRF). At the moment it is no problem to realize the rotational periodic condition. But if I change the boundary conditions for the inlet & outlet to trans. periodic condition, after a few iteration steps my problems start to diverge. Have somebody experience (using FLUENT) with trans. periodic condition combined with 2 or more fluid zones ?

For every help I am truly grateful.
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] Problems with coedge curves and surfaces tommymoose ANSYS Meshing & Geometry 0 August 5, 2011 16:02
Confusion between 'non-slip' and 'slip' B.C jinwon park Main CFD Forum 7 March 6, 2008 05:56
Urgent! Help on UDF to set B.C. of 3rd type Ray Hong FLUENT 0 December 28, 2005 20:35
How to set B.C. of the 2nd or 3rd type in UDS? Ray Hong FLUENT 0 December 28, 2005 07:03
Free Air B.C problems Riaan FLUENT 20 January 29, 2005 16:52

All times are GMT -4. The time now is 20:07.