|
[Sponsors] |
February 2, 2001, 07:30 |
UNSTEDY FLOW OVER A CIRCULAR CYLINDER
|
#1 |
Guest
Posts: n/a
|
Hi,I am stuck with a pretty easy problem!.I can't solve viscous flow over a circular cylinder..I'm not getting the Karman vortices,and vortex shedding....also the solution in the turbulence regime is not at all correct....any suggestions?????? Thanks to all who answers, Sanjib.
|
|
February 6, 2001, 01:27 |
Re: UNSTEDY FLOW OVER A CIRCULAR CYLINDER
|
#2 |
Guest
Posts: n/a
|
what method are you using????
|
|
February 6, 2001, 01:28 |
Re: UNSTEDY FLOW OVER A CIRCULAR CYLINDER
|
#3 |
Guest
Posts: n/a
|
sorry, I didn't notice this is Fluent section.
|
|
February 11, 2001, 12:19 |
Re: UNSTEDY FLOW OVER A CIRCULAR CYLINDER
|
#4 |
Guest
Posts: n/a
|
(1). If you don't know how to solve the problem, then you need to take a CFD course first and find out whether it is possible to solve the problem or not. (2). If the turbulence model is not giving you the correct answer, you need to do some research in turbulence modeling and find out whether you need to improve the model or not. (3). If you are using a commercial code, then you should get a sample case from the vendor first before you attempt to solve your problem. Ask the support engineer to show you how to solve your problem, otherwise, try some other codes or write your own.
|
|
March 16, 2001, 01:22 |
Re: UNSTEDY FLOW OVER A CIRCULAR CYLINDER
|
#5 |
Guest
Posts: n/a
|
Does your solution converge? What are your boundary conditions? Which turbulence model did you choose?
|
|
March 16, 2001, 01:49 |
Re: UNSTEDY FLOW OVER A CIRCULAR CYLINDER
|
#6 |
Guest
Posts: n/a
|
Hi Chetan,
yes,the solution converged.the boundary conditions were,velocity inlet,pressure outlet,symmetry,and wall at the cylinder surface.the turbulence model is k-e. did you get the results?please inform if you did so. Sanjib. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Particle deposition on circular cylinder in turbulent flow | Julian K. | CFX | 1 | October 3, 2011 17:51 |
Which Solver/Model to use for flow over Circular Cylinder ? Re [1 , 10^6] | WolfgangS. | OpenFOAM Running, Solving & CFD | 1 | December 6, 2010 02:48 |
3D FLOW OVER A CIRCULAR CYLINDER | Srinivas Mettu | FLUENT | 2 | April 4, 2010 22:11 |
flow past a circular cylinder | Senthilkumar | Main CFD Forum | 2 | April 19, 2009 23:18 |
fluid flow fundas | ram | Main CFD Forum | 5 | June 17, 2000 21:31 |