CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   Sliding mesh interfaces (http://www.cfd-online.com/Forums/fluent/28229-sliding-mesh-interfaces.html)

Karl Kevala February 19, 2001 16:10

Sliding mesh interfaces
 
I having a sliding interface that is circular and a full 360 degrees.

In older versions of Fluent, you had to define the sliding interface as periodic if it was 360 degrees.

I have not been able to find a reference as to whether or not it is necessary to define it as periodic in Fluent 5.4. Does anyone know if it must be defined as periodic.

Thanks in advance.

Karl Kevala

Harry February 20, 2001 05:31

Re: Sliding mesh interfaces
 
in fluent 5.3 i use, you don't need to do that


All times are GMT -4. The time now is 11:32.