CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   how to set the porous boundary condition (http://www.cfd-online.com/Forums/fluent/28337-how-set-porous-boundary-condition.html)

chocheng March 22, 2001 00:13

how to set the porous boundary condition
 
I want to set the porous zone to have the filter character,but I do not know how to set it.


Evan Rosenbaum March 22, 2001 12:42

Re: how to set the porous boundary condition
 
If I understand your intention, you are trying to use a porous medium to trap particles in tour simulation. You can't do this with FLUENT, which models porous media as an additional sink term on the momentum equation.

Lanre March 22, 2001 13:42

Re: how to set the porous boundary condition
 
Use the Porous Jump BC and set the DPM condition to "Trap"


All times are GMT -4. The time now is 10:42.