CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

mixing with stirrer

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   April 10, 2001, 12:30
Default mixing with stirrer
  #1
fawzy
Guest
 
Posts: n/a
I want to know how to use the multiple refernce frame (fluent 5) to model the flow around the stirrer. I used one circular section of grid around the stirrer, this region is solved in reference frame, while the outer region is solved in stationnary reference frame. but i' m not sure is good idea to do that, because the stirrer 's ends are too near the tank's wall.

Thanks for your help
  Reply With Quote

Old   April 11, 2001, 06:17
Default Re: mixing with stirrer
  #2
Jin-Wook LEE
Guest
 
Posts: n/a
Dear fawzy

Yes. You are right if you have baffle near the tank wall. You said 'the stirrer 's ends are too near the tank's wall'. Then, how do you have baffle(or plate) near the tank wall ? If you do not have any baffle near the wall, then you don't need to separate fluid region by two region. Single reference frame is correct way, theoretically and physically.

One comment : steady flow with multiple reference frame is approximation of unsteady flow. Whereas, single reference frame is physically steady flow.

Sincerely, Jinwook

  Reply With Quote

Old   April 12, 2001, 13:17
Default Re: mixing with stirrer
  #3
fawzy
Guest
 
Posts: n/a
Dear Jinwook

Thanks for your advice

sincerely, fawzy

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
mixing plane model: too much backflow and does not converge sbhi FLUENT 1 December 4, 2014 01:31
Problem with Mixing plane Mitpostdoc FLUENT 0 July 26, 2011 14:31
Meshing a Mixing Plane using ICEM Will Anderson FLUENT 0 November 6, 2010 18:08
turbine efficiencies, conservation rules across mixing planes Jonathan FLUENT 0 October 4, 2010 09:04
Mixing plane geometry definition Hbet FLUENT 0 January 18, 2002 08:16


All times are GMT -4. The time now is 22:53.