CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Sweep Real Faces, Time Problem !!!

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 8, 2001, 08:54
Default Sweep Real Faces, Time Problem !!!
  #1
Thomas Farmakis & George Zioupos
Guest
 
Posts: n/a
Why is the "Sweep Real Faces" command using perpendicular draft (extended type), under a certain angle, so slow in operations? We tried to sweep a circular face along 13 different successive real edges (in order to construct an artery) and after the third sweep operation I had to wait for hours to achieve the result. We would say that the calculation time increased with the power law in these successive sweep operations. Can anybody help?

Thanks in advance,

Thomas Farmakis, MD George Zioupos, M.Sc.

AHEPA Hospital, Aristotle Univercity of Thessaloniki, GREECE
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Multiple floating objects CKH OpenFOAM Running, Solving & CFD 14 February 20, 2019 10:08
Orifice Plate with a fully developed flow - Problems with convergence jonmec OpenFOAM Running, Solving & CFD 3 July 28, 2011 06:24
Problem in IMPORT of ICEM input file in FLUENT csvirume FLUENT 2 September 9, 2009 02:08
Unaligned accesses on IA64 andre OpenFOAM 5 June 23, 2008 11:37
unsteady calcs in FLUENT Sanjay Padhiar Main CFD Forum 1 March 31, 1999 13:32


All times are GMT -4. The time now is 07:45.