CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

boundary layer mesh

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   June 19, 2001, 10:27
Default boundary layer mesh
  #1
merac
Guest
 
Posts: n/a
Can anyone tell me why Gambit skews my 3D pipe/annulus boundary layer? I use an even number of intervals on my edge mesh, but Gambit always skews the radial parts of my boundary layer instead of them all pointing inward at the cylinder axis! Has anyone else come across this? Help!
  Reply With Quote

Old   June 19, 2001, 11:45
Default Re: boundary layer mesh
  #2
Sandeep
Guest
 
Posts: n/a
split the annulus volume into two volumes using a face. that should help you "map" the source faces and generate a nice mesh.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Number of cells in mesh don't match with size of cellLevel colinB OpenFOAM Native Meshers: snappyHexMesh and Others 11 January 13, 2015 12:47
Wind turbine simulation Saturn CFX 34 October 16, 2014 05:27
How to make boundary layer mesh moving with wall wayne FLUENT 3 June 11, 2008 23:23
Is the boundary layer suitable for dynamic mesh? Lien FLUENT 0 December 26, 2007 02:41
AMG divergence and boundary layer mesh Justin FLUENT 0 November 4, 2007 18:24


All times are GMT -4. The time now is 00:37.