CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Mixing plane model

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 5, 2001, 09:58
Default Mixing plane model
  #1
Antoine Ringo
Guest
 
Posts: n/a
I have a question about the mixing plane model used to simulate flows in moving zones. I don't manage to reach the convergence for the continuity. Have you ever had this problem ? How did you fix it ? Do you know any articles dealing with that ? Thank you.
  Reply With Quote

Old   July 6, 2001, 02:46
Default Re: Mixing plane model
  #2
Chetan Kadakia
Guest
 
Posts: n/a
Again we have a convergence problem but we very little idea what you did. Everybody has trouble converging from time to time. What are your solution controls, boundary conditions, etcetera, etcetera... I'm guessing all of you who ask for a solution but provide no infromation must be a manager and not an engineer. If you have fast a fast moving zone, try to start with it slow, let it converge, and then increase the speed in reasonable increments.
  Reply With Quote

Old   July 30, 2001, 09:25
Default Re: Mixing plane model
  #3
Bipin
Guest
 
Posts: n/a
Hi,

Follow this;

1. Body-force-weighted scheme for pressure interpolation. 2. Underelax the momentum to 0.5 and pressure to 0.2. 3. Start with a slow speed and then ramp up slowly.

Hope this helps.

  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Mixing plane for centrifugal compressor Mitpostdoc FLUENT 0 March 24, 2011 18:27
convergence problem of the SST and RNG k-e model for mixing tank ziyan7 FLUENT 0 March 8, 2011 07:13
Turbulence model for mixing problem??? nileshjrane Main CFD Forum 7 September 14, 2010 05:57
Axial/Radial Mixing Plane in Pump Flow Thomas Augy FLUENT 0 February 19, 2002 06:46
Mixing plane geometry definition Hbet FLUENT 0 January 18, 2002 08:16


All times are GMT -4. The time now is 06:23.