CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

about error message in fluent

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 10, 2001, 03:31
Default about error message in fluent
  #1
Devy
Guest
 
Posts: n/a
Now I have a question when I simulate burning of gas.I use eddy dissipation reaction model,ideal gas ,couple implicit solver.

When i have got a good cold flow solution, I pacth 2000K in combustion zone.After some iterations,I've been getting this AMG solver error : Error: Internal error at line 719 in file 'amgif.c'. divergence detected in AMG solve.

I've tried everything I can imagine!!! Would you give me some advice? Thanks a lot, in advance......

Devy 2001.7.10
  Reply With Quote

Old   July 10, 2001, 04:49
Default Re: about error message in fluent
  #2
bas rijkse
Guest
 
Posts: n/a
The problem is that you solution will not converge. There are several causes for this failure. Like a grid which is not good (skewness, connectivity). The RSM turbulunce model is very sensitive to these things. Maybe you should try another model first.
  Reply With Quote

Old   July 10, 2001, 05:38
Default Re: about error message in fluent
  #3
Devy
Guest
 
Posts: n/a
Hi,

Thank you for your reply.

After I have got a good cold flow solution, I pacth 2000K in combustion zone.After1000 or so iterations,Fluent suddenly can't continue to calculate and it also don't reduce the CFL.

I think it is boundary conditions accounting for this error.I try to define one gas species fraction on boundary as zero diffusive flux,this problem doesn't happen.But the gas species fraction is physically value 1.

Now I still don't know how to solve it.
  Reply With Quote

Old   August 1, 2001, 05:10
Default Re: about error message in fluent
  #4
edvin
Guest
 
Posts: n/a
one think you can do is to change the initial values. giving a nonzero value to the initials may converge your problem. and try to keep your under relaxation parameters low.

edvin
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Stopping a Fluent batch job AND saving the data! Possible? Volker Pawlik FLUENT 7 May 22, 2014 22:30
A Problem of Fluent Interpreted UDF: parse error knight Fluent UDF and Scheme Programming 11 December 8, 2013 10:00
Two questions on Fluent UDF Steven Fluent UDF and Scheme Programming 4 September 20, 2013 16:30
Compared MRFSimpleFoam and Fluent in a centrifugal pump! renyun0511 OpenFOAM Running, Solving & CFD 8 July 6, 2010 06:24
Problems in lauching FLUENT Lourival FLUENT 3 January 16, 2008 17:48


All times are GMT -4. The time now is 06:55.