CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Volume grid growth

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 10, 2001, 09:00
Default Volume grid growth
  #1
Troy
Guest
 
Posts: n/a
Apart from insuring a point in the laminar sublayer. How far(inches) should a volume grid be grown from the surface, using the spacing normal to a solid surface required to yield 1 grid point in the laminar sublayer?
  Reply With Quote

Old   July 12, 2001, 14:38
Default Re: Volume grid growth
  #2
Lanre
Guest
 
Posts: n/a
The volume grid should be grown according to the Reynolds number of your problem. To compute the BL thickness or y+, estimate this from correlations in any Fluid Mechanics textbook.

The typical spacing recommendations to reduce diffusion errors is a 20-30% growth rate, i.e., normal length of cell from wall should not increase by more than 30% from the preceding cell. Put about 10 cells in the BL.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
alphaEqn.H in twoPhaseEulerFoam cheng1988sjtu OpenFOAM Bugs 14 September 18, 2011 13:46
MapFields to New Grid For Extreme Grid Deformations due to Body Motion albcem OpenFOAM 0 May 5, 2009 14:17
CuBit t42 OpenFOAM Meshing & Mesh Conversion 6 July 10, 2008 07:51
Finite Volume Approach For Unstructured grid APURVA SHUKLA Main CFD Forum 2 March 15, 2001 01:14
Grid Independent Solution Chuck Leakeas Main CFD Forum 2 May 26, 2000 11:18


All times are GMT -4. The time now is 09:41.