CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

about reaction of pure oxygen and CH4 in fluent5.4

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 29, 2001, 21:04
Default about reaction of pure oxygen and CH4 in fluent5.4
  #1
Devy
Guest
 
Posts: n/a
This message was posted some weeks ago.But I still don't know how to solve it.So I post it again.If you have a ideal,please let me know.Thank you.

Now I am studying TUT 8.in fluent mannul, "Chemical Mixing and Gas Combustion". I don't consider the reaction of air and CH4.I just consider the reaction of pure oxygen and CH4.So I remove the N2 from material pannel.I change the air as to oxygen in the boundary of air-inlet.And I use Cp calcualated by mixing law and put the piecewise-polynomials in for each species. I don't change the other model.

When the solution is converged,I found the temperature rised to 4800K.And this is not true.Theoretical values of combustion temperature can be obtained from industry standard thermochemical codes for pure oxygen and CH4.And the temperature is about 2800K.

I've tried everything I can imagine!!!

Would you give me some advice?

Thanks a lot, in advance......

Devy 2001.7.29

  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
UDF about reaction in fluent5.4 Mark FLUENT 5 May 1, 2014 18:39
about reaction of pure oxygen and CH4 Devy FLUENT 0 July 20, 2001 11:33
about reaction of oxygen and CH4 Devy FLUENT 6 July 13, 2001 09:07


All times are GMT -4. The time now is 08:29.