CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Free jet

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   September 7, 2001, 05:08
Default Free jet
  #1
Til Haendler
Guest
 
Posts: n/a
Hi. I am trying to simulate the entrainment (and the angle of spread) of a free air jet in stagnant air surroundings. This free jet is

(i) an axisymmetric central jet or (ii) an axisymmetric annular jet. (iii) In a further step I want to combine the two jets.

Re-Number is about 2500...13000, nozzle exit velocity is about 8...40 m/s.

My problem is: which is the correct Viscous Model to use (k-epsilon ?), which are the correct Model Constants?

Thank you in advance! Til
  Reply With Quote

Old   September 12, 2001, 10:39
Default Re: Free jet
  #2
Volker Pawlik
Guest
 
Posts: n/a
The users's guide advises to use the realizable-k-eps, since it is the only one (of the k-e-models fluent offers) which doesn't show the round jet anomaly (bad angles of spread).

Volker
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Help!simulation of free water jet Annie FLUENT 3 June 29, 2009 00:51
Free jet B.C. shuo Main CFD Forum 0 August 10, 2008 03:46
Free Jet krish FLUENT 0 January 4, 2008 06:07
Asymmetric water free jet study Norberto Parreira Main CFD Forum 7 June 25, 2001 08:23
Radial jet with free surface using FIDAP Dr. Ahmed Hassaneen Main CFD Forum 0 October 28, 1999 13:20


All times are GMT -4. The time now is 20:16.