CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   How to grid a bellmouth contour Inlet? (http://www.cfd-online.com/Forums/fluent/28928-how-grid-bellmouth-contour-inlet.html)

Yao September 17, 2001 10:14

How to grid a bellmouth contour Inlet?
 
Hello,

I have to grid a model of nozzle with a bellmouth contour inlet part? Here is the data:

x Y -1.94 1.6097 -2.2614 1.6218 -2.5808 1.6804 -2.8950 1.7294 -3.1991 1.8339 -3.4853 1.9803 -3.7406 2.1752 -3.9455 2.4222 -4.0771 2.7147 -4.1209 3.0325

I use Quad/Map to grid it. But I found this model would crash quickly in Fluent.

Anybody has good ideas of griding so steep a inlet? Thanks very much.

YAO

Andres D. Ortiz October 7, 2001 19:32

Re: How to grid a bellmouth contour Inlet?
 
Still you need help??? let me know

joseph October 31, 2001 05:53

Re: How to grid a bellmouth contour Inlet?
 
Also got the same problem to define which mesh could be the most adapted for a bellmouth contour inlet. thank for all.


All times are GMT -4. The time now is 13:57.