CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   Flow-Response Dynamic Coupled problem (http://www.cfd-online.com/Forums/fluent/28939-flow-response-dynamic-coupled-problem.html)

wavefront September 21, 2001 13:57

Flow-Response Dynamic Coupled problem
 
I have to perform a flow simulation, after I finished the flow simulation and get the pressure distribution in the analysis space, I'd like to put the pressure on a part which is in the analysis space, to see how dose the part vibrate under that pressure.

Anybody could recommend a software to finish this task? Currently, I'm using FLUENT because there's some turbulence in the analysis space, but FLUENT can't do vibration analysis. It's a kind of Flow-Response Dynamic Coupled problem.

Thanks a lot

Lanre September 26, 2001 12:48

Re: Flow-Response Dynamic Coupled problem
 
Take a look at these examples on the web:

http://www.fluent.com/about/news/new...98v7i2/a17.htm

http://www.fluent.com/about/news/new...01v10i1/a9.htm

wavefront September 28, 2001 11:33

Re: Flow-Response Dynamic Coupled problem
 
Thanks Lanre,

That gives me some clues.

Thanks again


All times are GMT -4. The time now is 20:20.