CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Nozzle Flow with shock

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 25, 2001, 18:42
Default Nozzle Flow with shock
  #1
jim clancy
Guest
 
Posts: n/a
Hello everyone,

I solved the flow inside a convergent divergent nozzle. I used the pressure inlet and pressure outlet boundary coditions. In the supersonic outlet flow the solution converged with solution close to the 1-D analytical solution. I tried to capture the shock wave in the divergeny portion, I increased the pressure at the outlet boundary but unforunately, the flow is always supersonic at the exit and there is no shock wave.

Can anyone help be in this issue. Thanx in Advance.

Jim
  Reply With Quote

Old   December 18, 2001, 05:19
Default Re: Nozzle Flow with shock
  #2
Victory
Guest
 
Posts: n/a
Hi! Try the following: 1. Create additional space out of nozzle 2. Use the unsteady solver 3. Set pressure on outlet bondary at once

Sincerely, Victory
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Shock in nozzle - when Christian Main CFD Forum 5 September 20, 2014 10:26
Nozzle Flow - Divergence Problem Ijaz FLUENT 9 January 11, 2014 05:36
Compressible de Laval Nozzle Flow rw511 CFX 3 May 22, 2011 20:48
Nozzle Flow Simulation Winnie CFX 0 August 24, 2007 11:10
Axisymmetirc Compressible Flow in a C/c and Nozzle Nauman FLUENT 0 December 21, 2004 08:40


All times are GMT -4. The time now is 09:00.