CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

modelling gas injection,help

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   October 30, 2001, 01:48
Default modelling gas injection,help
  #1
gorman
Guest
 
Posts: n/a
hi i am modelling a gas injection system to bring up heavy oil that has not enough pressure to rise up in 2 sets of tubing size.The inner tube is for oil flow upward and outer tube is to pump the CO2 downwards and enter the inner tube at 0.25 above the oil inlet opennings while blocked by packer at the outer tube.The length of the tubes is 2.0.Is there any source of example model of gas injection like this? what is the downward underground distance should i assume to locate this system?
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Modelling the heat transfer during compression and cooling of natural gas pano Main CFD Forum 0 December 10, 2010 16:53
Constant velocity of the material Sas CFX 15 July 13, 2010 08:56
mass flow in is not equal to mass flow out saii CFX 2 September 18, 2009 08:07
Two-Phase Buoyant Flow Issue Miguel Baritto CFX 4 August 31, 2006 12:02
Gas pressure question Dan Moskal Main CFD Forum 0 October 24, 2002 22:02


All times are GMT -4. The time now is 09:28.