|
[Sponsors] |
October 30, 2001, 00:48 |
modelling gas injection,help
|
#1 |
Guest
Posts: n/a
|
hi i am modelling a gas injection system to bring up heavy oil that has not enough pressure to rise up in 2 sets of tubing size.The inner tube is for oil flow upward and outer tube is to pump the CO2 downwards and enter the inner tube at 0.25 above the oil inlet opennings while blocked by packer at the outer tube.The length of the tubes is 2.0.Is there any source of example model of gas injection like this? what is the downward underground distance should i assume to locate this system?
|
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
mass flow in is not equal to mass flow out | saii | CFX | 12 | March 19, 2018 05:21 |
Modelling the heat transfer during compression and cooling of natural gas | pano | Main CFD Forum | 0 | December 10, 2010 15:53 |
Constant velocity of the material | Sas | CFX | 15 | July 13, 2010 08:56 |
Two-Phase Buoyant Flow Issue | Miguel Baritto | CFX | 4 | August 31, 2006 12:02 |
Gas pressure question | Dan Moskal | Main CFD Forum | 0 | October 24, 2002 22:02 |