CFD Online Logo CFD Online URL
Home > Forums > FLUENT

Creating a Geometry in GAMBIT

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   November 16, 2001, 02:23
Default Creating a Geometry in GAMBIT
Posts: n/a
Dear Gambit Users,

I have created a 90 degree elbow shaped geometry with circular cross section in 3D using Gambit, actually I want to study the turbulent flow in it. I am intrested in placing a small obstacle ( solid brick) right at the bend which hangs into the flow from the outer surface. I dont know how to create such type of geometry with a solid body inside it. I greatly appreciate if anyone can suggest me how to create this geometry.


  Reply With Quote

Old   November 21, 2001, 15:07
Default Re: Creating a Geometry in GAMBIT
Posts: n/a
find the coordinate of the point in the centre of the pipe in its elbow area where you want to position the little brick. Using Tools Command Button/Cordinate System/Create Coordinate System/location and Orientation-Vertices, create new local coordinate system using this vertex (a coordinate point in the centre of the elbow) as the origin. Create a brick in this new coordinate system. Split the pipe volume with the brick volume. New volume you get will surround the brick, that will be the volume for the fluid, while to the brick volume you will assign Solid property under Continuum icon.

  Reply With Quote

Old   November 26, 2001, 11:11
Default Re: Creating a Geometry in GAMBIT
Posts: n/a
Or just subtract the brick from the elbow
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Gambit - Mesh Problem for a complex 3D geometry Nelson FLUENT 3 May 28, 2012 06:57
create turbine geometry with gambit badlaine ANSYS Meshing & Geometry 2 March 26, 2012 23:54
Gambit geometry construction questions yueke FLUENT 0 June 25, 2009 14:50
I want file sedan geometry for Gambit tutorial paratee001 Main CFD Forum 0 June 20, 2009 12:10
Creating a mesh in Gambit Vidya Raja FLUENT 3 October 3, 2005 10:45

All times are GMT -4. The time now is 09:24.