CFD Online Logo CFD Online URL
Home > Forums > FLUENT

Gambit - meshing question

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   November 25, 2001, 08:04
Default Gambit - meshing question
Pei-Ying Hsieh
Posts: n/a

I have a simple cubic box. On the top surface of the box, I have several inlet holes. And, on the opposite side of the cubic box (bottom surface), I also have identical inlet holes (same sizes located at the relative positions). I can easily mesh the top surface. How can I use this mesh and propagate toward the bottom surface? Cooper scheme does not seem to work becasue the un-meshed source surface needs to be ONE complete surface (in my case, I have the main surface + the inlet holes). Any suggestion will be highly appreciated.

  Reply With Quote

Old   November 26, 2001, 11:08
Default Re: Gambit - meshing question
Posts: n/a
Create cilinders from top holes to bottom holes. Split cube with cilinders. All volumes can now be coopered.
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
[ANSYS Meshing] ANSYS Meshing vs GAMBIT aerospain ANSYS Meshing & Geometry 0 September 28, 2011 06:05
Gambit - meshing over airfoil wrapping (?) problem JFDC FLUENT 1 July 11, 2011 05:59
[ANSYS Meshing] Migrating from GAMBIT to ANSYS Meshing David-CFD ANSYS Meshing & Geometry 1 April 1, 2011 05:22
[GAMBIT] Desperate student needs help meshing 3D GAMBIT model - please help! lau06165 ANSYS Meshing & Geometry 1 March 22, 2010 02:09
Meshing Aircraft with Gambit Ed FLUENT 5 November 9, 2004 06:04

All times are GMT -4. The time now is 10:20.