CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Simulation of Porous Media Flow

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   December 24, 2001, 02:57
Default Simulation of Porous Media Flow
  #1
Sharad Dugad
Guest
 
Posts: n/a
I want to simulate the turbulent flow in a channel, whose bed is porous and there is upward seepage through the bed along with a turbulent flow in the channel. Is it possible to simulate the laminar flow in the porous sand bed and turbulent flow above the bed at the interface simultaneuosly to get velocity and shear stress distributions? How to set the boundary condition at the sand & water interface which will take into account the roughness of sand and the upward seepage velocity? Please help at the earliest. Thanks in advance.

Sharad Dugad
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
modeling the fluid flow in porous media by Fluent Mohsen Nazari FLUENT 3 November 17, 2014 08:53
Flow simulation in porous media olesen OpenFOAM Running, Solving & CFD 18 November 20, 2012 03:10
rotating porous media in a general flow a_dores FLUENT 0 October 31, 2010 05:50
species mass source in porous media ? PK FLUENT 0 February 16, 2007 12:12
Simulation of a flow through porous mesh in fluent G.Vijaya Rama Reddy FLUENT 0 September 14, 2006 00:35


All times are GMT -4. The time now is 06:36.