CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Grid problems

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   January 15, 2002, 03:36
Default Grid problems
  #1
Christian
Guest
 
Posts: n/a
Hi.

In meshing my GAMBIT model I have encountered the follwing message:

Impossible edge mesh/face scheme combination. Turn mesh_flags_incremental_display default on.

I don't know how to turn this on, and the manual is not much help. Does anyone out there know the answer ?

Christian
  Reply With Quote

Old   January 15, 2002, 10:55
Default Re: Grid problems
  #2
phil
Guest
 
Posts: n/a
go to EDIT in top left corner of screen. click on DEFAULTS click on MESH click on FLAGS radio button then set incremental_display variable to 1
  Reply With Quote

Old   January 15, 2002, 17:13
Default Re: Grid problems
  #3
Erwin
Guest
 
Posts: n/a
First of all, this message is part of a number (3) of possible causes of failure. Usually when I get this error message I have a problem with my vertex types: for example, I want to create a mapped mesh on a face, but the vertex types are screwed up (you need 4 vertices called 'E' at logical locations to create a mapped mesh).

Check your vertex types by selecting the face, and see if they match with what you really want to do. If there is a problem, you can change the vertex to the appropriate type in the 'Set face vertex type' panel (second from the right).
  Reply With Quote

Old   January 16, 2002, 03:55
Default Re: Grid problems
  #4
Christian
Guest
 
Posts: n/a
Thank you, Phil and Erwin

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Questions for a species transport problems (snapshots attached) aleisia FLUENT 2 October 9, 2011 04:40
grid on a circle HaKu Main CFD Forum 4 April 15, 2010 11:56
MapFields to New Grid For Extreme Grid Deformations due to Body Motion albcem OpenFOAM 0 May 5, 2009 14:17
"grid points" or "grid interface" ztdep Main CFD Forum 1 June 6, 2007 15:00
Problems in grid generation in ICEM Tim CFX 1 September 30, 2006 06:43


All times are GMT -4. The time now is 14:52.