CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   Meshing parent and daughter arteries (http://www.cfd-online.com/Forums/fluent/29329-meshing-parent-daughter-arteries.html)

Pravir Kuma Rai February 6, 2002 19:06

Meshing parent and daughter arteries
 
I want to draw 3 cylinders in the SAME PLANE having the dimensions specified : cyl.1-->radii-1.8cm , height-12 cm , cyl.2 and cyl.3-->radii-1.22 , height-4.76 cm

They have to be drawn such that it looks like Parent(cyl.1) and Daughter arteries(cyl.2 and 3). How do I draw it such that I can mesh the resulting geometry by hexahedral meshing.


sharad Dugad February 9, 2002 12:54

Re: Meshing parent and daughter arteries
 
if you have gambit tutirial guide, try tutorial on "three pipe junction", I hope you will get further ideas how to make relevant changes to obtain the geometry as you require it to be!

Pravir Kumar Rai February 11, 2002 20:16

Re: Meshing parent and daughter arteries
 
I have done the 3 pipe intersection but my problem is that all the 3 pipes are in same plane unlike in the tutorial problem.So how do I make separate volumes after uniting them by the sphere.


All times are GMT -4. The time now is 03:17.