CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Axial/Radial Mixing Plane in Pump Flow

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 19, 2002, 06:46
Default Axial/Radial Mixing Plane in Pump Flow
  #1
Thomas Augy
Guest
 
Posts: n/a
Dear Fluent Users,

If a mixing plane lies perpendicular to the axis of rotation of a pump for example, how should it be specified in Fluent Define > Mixing Planes > Mixing Plane Geometry menu, as Radial or Axial ?

Alternatively, how should it be defined if it is a cylindrical surface concentric with the axis of rotation ?

Your comments will be appreciated.

Thomas
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Calculation of mass flow rate through a plane titio OpenFOAM Post-Processing 2 September 28, 2010 00:28
Unable to switch from Rotating Reference Frame to Mixing Plane bwg FLUENT 0 July 10, 2009 14:56
Turbine stage mixing plane calculation Knut FLUENT 0 December 4, 2007 13:46
MFR and mixing plane boundary . Mica Main CFD Forum 0 January 26, 2007 10:40
axial flow pump, inflow boundary tma CFX 3 September 26, 2002 15:28


All times are GMT -4. The time now is 21:44.