CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Cylinder trip-need help?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 19, 2002, 09:28
Default Cylinder trip-need help?
  #1
Andrew Parker
Guest
 
Posts: n/a
Dear all

Can anybody help me with advice on some experimental problems that I am having. I have used fluent to predict the laminar pressure distribution around a cylinder, and the comparison is very good. I would now like to make the boundary layer turbulent, and do the same with different turbulence models, especially the RSM. I need help in finding info on the web, or in a book, that can tell me how to place a transition trip wire in front of a cylinder or on the surface, in a wind tunnel. I need to know the size, diameter, position form the stagnation point round the cylinder, and loads of other stuff. Can anybody suggest a good book or even better, a paper or web site that's explains all and more.

Cheers

Andy
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
benchmark: flow over a circular cylinder goodegg Main CFD Forum 12 January 22, 2013 12:47
Incorrect Drag and Drag Coefficient for flow over a cylinder ozzythewise Main CFD Forum 8 June 13, 2012 06:24
Specifying boundary faces failes in blockMesh blaise OpenFOAM Meshing & Mesh Conversion 0 May 10, 2010 03:56
rotating cylinder using sliding mesh Tim Daly FLUENT 1 November 10, 2008 00:02
Turbulent steady flow around a circular cylinder Mirek Kabacinski FLUENT 0 July 23, 2003 18:40


All times are GMT -4. The time now is 20:56.