CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Pressure BC

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 27, 2002, 03:57
Default Pressure BC
  #1
Mavinakere
Guest
 
Posts: n/a
Hi,I'm analysing a multiphase flow that is water and air around a automobile tire.I made a 2d rectangular model with a tire inside.my domain is: 1m in front of the tire and 2m in back of the tire.height is 1m.All the dimensions are with the tire axis.the bottom edge is the ground which is just 1MM below the tire. MY QUESTION IS :what is the appropriate BC on the top edge and the edge behind the tire. I'm using pressure outlet for edge behind the tire. If i use far field pressure for the top edge i get sg_mphase.c error when i initialize. Is it advisable to use symmetry condition on the top? The BC i need there is a DPDN zero...pressure in the cell next to the edge is same as it is on the edge. but what kind of BC does this? Anybody plz respond...thanks.Mavinakere.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Calculation of the Governing Equations Mihail CFX 7 September 7, 2014 06:27
Pressure instabilities with interDyMFoam for the floatingObject case nbadano OpenFOAM Running, Solving & CFD 14 March 8, 2011 09:19
Using pressure outlet BC Shreyansh FLUENT 0 November 5, 2010 15:57
Help ASAP! pressure inlet & outlet engahmed FLUENT 0 June 13, 2010 15:33
Setting pressure and velocity in inlet Asghari FLUENT 5 September 22, 2006 13:23


All times are GMT -4. The time now is 09:11.