CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLUENT (http://www.cfd-online.com/Forums/fluent/)
-   -   surface reaction (http://www.cfd-online.com/Forums/fluent/29425-surface-reaction.html)

ivan February 28, 2002 07:24

surface reaction
 
Hi, do you know how to locate a reaction at the surface of a porous zone ? (I should perform surface reaction, which can be done only if I have "wall" boundary, but I should supply O2 from there and I use porous zone) Thank you in advance

Thitikorn March 20, 2002 05:26

Re: surface reaction
 
It same my simulation too. You can set reaction in porous zone by, Define-Reaction > Restrict-Reaction

Yes Reaction active in porous media only

No Reaction active in non-porous media only But you have to use some reaction (not all-reaction) in porous zone or you have many porous zone. You must use User-Defined-Subroutines to solve it.

ivan March 21, 2002 06:07

Re: surface reaction
 
Thanks, I've recently found a way using "User Defined Functions", it's a very powerful tool


All times are GMT -4. The time now is 10:57.