CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

surface reaction

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 28, 2002, 06:24
Default surface reaction
  #1
ivan
Guest
 
Posts: n/a
Hi, do you know how to locate a reaction at the surface of a porous zone ? (I should perform surface reaction, which can be done only if I have "wall" boundary, but I should supply O2 from there and I use porous zone) Thank you in advance
  Reply With Quote

Old   March 20, 2002, 04:26
Default Re: surface reaction
  #2
Thitikorn
Guest
 
Posts: n/a
It same my simulation too. You can set reaction in porous zone by, Define-Reaction > Restrict-Reaction

Yes Reaction active in porous media only

No Reaction active in non-porous media only But you have to use some reaction (not all-reaction) in porous zone or you have many porous zone. You must use User-Defined-Subroutines to solve it.
  Reply With Quote

Old   March 21, 2002, 05:07
Default Re: surface reaction
  #3
ivan
Guest
 
Posts: n/a
Thanks, I've recently found a way using "User Defined Functions", it's a very powerful tool
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Segmentation fault in running alternateSteadyReactingFoam,why? NewKid OpenFOAM 18 January 20, 2011 16:55
particle surface reaction fkuwo FLUENT 0 August 14, 2009 11:04
Problem with Gmsh nishant_hull Open Source Meshers: Gmsh, Netgen, CGNS, ... 17 December 7, 2007 01:33
CFX4.3 -build analysis form Chie Min CFX 5 July 12, 2001 23:19
chemical reaction - decompostition La S. Hyuck CFX 1 May 23, 2001 00:07


All times are GMT -4. The time now is 19:10.