CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Gambit - all blades

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 1, 2002, 14:30
Default Gambit - all blades
  #1
pp
Guest
 
Posts: n/a
Hi,

I just start to model flow throught Francis turbine. Well I need also to mesh all stator blades. I try to mesh only one blade-to-blade passage and then copy mesh no_blade times. Finall mesh is OK but with wall zone between two meshes.

Does someone know how can I make in GAMBIT a finall mesh for all bledes with one meshed blade passage?

Thanks in advance
  Reply With Quote

Old   March 4, 2002, 03:18
Default Re: Gambit - all blades
  #2
kim
Guest
 
Posts: n/a
Switch to Fluent and fuse the walls to interiors. But be sure you have identical mesh on both walls. Kim
  Reply With Quote

Old   March 4, 2002, 13:24
Default Re: Gambit - all blades
  #3
pp
Guest
 
Posts: n/a
  Reply With Quote

Old   March 4, 2002, 13:24
Default Re: Gambit - all blades
  #4
pp
Guest
 
Posts: n/a
Thanks Kim
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Gambit help: Cube inside cube Jack Martinez FLUENT 13 August 11, 2010 07:29
Gambit 2.3.16, Xming or Exceed...HELP! bambam3417 FLUENT 10 May 7, 2010 13:39
how to model 3D twisted turbine blades in Gambit Usman FLUENT 1 February 13, 2008 08:36
Gambit -dev X11 doesn't work Ervin Amet FLUENT 0 October 28, 2007 10:33
Why the streamline passes through blades Jeniffer CFX 2 November 18, 2003 02:25


All times are GMT -4. The time now is 12:43.