CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

inlet condition ~??

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   April 4, 2002, 08:35
Default inlet condition ~??
  #1
karen
Guest
 
Posts: n/a
My model have two channel The property of wall is between the top channel and below channel . First mixtures [include H2 , CO2 ,H2O] flow through top of channel. Second mixtures [includes O2 , H2O , N2] flow through below of channel.but , first mixtures don't mixed with second mixtures and don't pass throgugh the interface(wall)to other channel ....the behavior of two fluid independently

Basic datas of Top channel Mass fraction of H2 is 0.066761 Mass fraction of H2O is 0.4474331069 Mass fraction of CO2 is 0.4858058 mixtures velocity is 0.43 m/sec

Basic datas of Below channel Mass fraction of O2 is 0.166787867 Mass fraction of H2O is 0.26002884 Mass fraction of N2 is 0.5731832 mixtures velocity is 0.56 m/sec

Two channel have a condition of inlet respectively.

How to define the properties of two mixtures in condition of inlet for my model ???? but ,if it is unclear meaning for you , you can tell me ...thank you best regard to you Hsin-Ping

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Problem with assigned inlet velocity profile as a boundary condition Ozgur_ FLUENT 2 August 3, 2012 05:54
How to use a solution as an inlet boundary condition in another problem in fluent geryes FLUENT 0 February 25, 2010 16:32
inlet and outlet boundary condition for turbomachinery solution siamak1424 OpenFOAM 2 August 15, 2009 11:14
outlet to inlet boundary condition assighna CFX 1 May 10, 2007 23:36
inlet and outlet boundary condition of pump Thammasak CFX 0 February 9, 2004 13:02


All times are GMT -4. The time now is 06:21.