CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Euler-model and walls!

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   April 8, 2002, 09:02
Default Euler-model and walls!
  #1
Yvonne
Guest
 
Posts: n/a
Hi everybody!

Imagine this: there's a flow through a pipe, with disturbing walls, where the flow should go around. Because I try to solve a multiphase flow eventually, I started with the mixture model (but first just one phase). The velocity counters looked meaningful, so based on this, I turned on the Eulerian model, which resulted in a weird counters display. It looks like the Eulerian-model doesn't 'see' the walls anymore and the flow goes through the walls! Anybody has an advice or had the problem before?

Thanks in advance, Yvonne
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Use of k-epsilon and k-omega Models Jade M Main CFD Forum 12 June 2, 2015 13:16
Epsilon boundary condition for walls in LamBremhorst LowRe model maruthamuthu_venkatraman OpenFOAM 0 March 16, 2010 04:27
deformation of walls on a model ejadisi FLUENT 0 February 2, 2010 11:32
How to model walls in envelope dominant heating indoor case elake Phoenics 0 April 11, 2009 11:08
CFD Software to Model Curtain Walls for Buidlings Jim Belling Main CFD Forum 5 September 26, 2006 06:49


All times are GMT -4. The time now is 23:52.