CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Creating line/lake in dynamic mesh

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   June 21, 2002, 04:07
Default Creating line/lake in dynamic mesh
  #1
J.W.Ryu
Guest
 
Posts: n/a
Dear Everybody,

I am trying to create lines by line/lake command in Surface menu, so as to make xy plot in the calculated domain. Dynamic meshing method was used in 2d symmetric model.

I tried several time to make line by inputing x-y coordinate. But, created line showed unintentional curve so that I could not make xy plot with created lines, even if I tried to make straight line.

I changed "micrometer" scale to compute scalar. In menu window of line/lake, unit displayed was "meter" Is this cause to be created wrong line? If yes, why is created line not straight but curved line? Or, is this trouble caused by dynamic meshing?

Is there anyone who has experienced like me? If yes, could you let me know how you've solved this trouble?

Thanks,

J.W.Ryu
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
3D Hybrid Mesh Errors DarrenC ANSYS Meshing & Geometry 11 August 5, 2013 06:42
Dynamic mesh in Fluent to study tire in contact with road surface lihuang FLUENT 10 March 8, 2011 11:21
Extended version: Dynamic mesh fusij OpenFOAM 2 February 18, 2011 03:12
Some questions about mesh updating in dynamic mesh technique lzgwhy Main CFD Forum 0 June 14, 2009 08:01
dynamic mesh and sliding mesh nasser FLUENT 0 November 1, 2005 03:37


All times are GMT -4. The time now is 15:53.