CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

case files created by Setupgrid

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   June 21, 2002, 05:54
Default case files created by Setupgrid
  #1
Federico Salimbeni
Guest
 
Posts: n/a
Dear All,

I'm trying to read a mesh (created by Setupgrid, a Centaursoft product, and converted in a .cas file by Hybconvert) using Fluent 4.5 but it doesn't succeed in doing that operation, and gives an input error. I used the command File/read/Case. Fluent displays the message: (*)- ERROR READING CASE FILE. (*)- SECTION ID=******, LABEL=" (*)- ABORTING READ. I'd like to know if there is any other thing to do or any problem with Fluent 4.5 or in the files created by Setupgrid. Thank you, Best regards, Federico Salimbeni.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Video from case and data files girino FLUENT 9 March 29, 2010 02:41
Changing the grid on the same set-up Katya FLUENT 12 October 8, 2009 16:31
Regarding FoamX running Kindly help out hariya03 OpenFOAM Pre-Processing 0 April 18, 2008 04:26
Different case files activate ALE Eq. kevin FLUENT 0 November 2, 2006 14:39
CFX4.3 -build analysis form Chie Min CFX 5 July 12, 2001 23:19


All times are GMT -4. The time now is 07:31.