CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

CFB in Hot model with Fluent6.0

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 4, 2002, 04:17
Default CFB in Hot model with Fluent6.0
  #1
Thitikorn
Guest
 
Posts: n/a
Now I have FLUENTNEWS magazine Volume 10, Issue 2*Winter 2001 in my hand.

In this magazine tell me Fluent 6.0 is very good for simulate The Eulerian granular multiphase model of CFB. But I want to simulate CFBC(Circulating fluidized bed combustor) in Hot model. It have combustion of coal and I want to investigate CO producted (***Oh! multicomponent and multiphase again***). Anybody plz tell me. Fluent 6.0 can simulate my model or not?

OR? Fluent program isn't suitable for Chemical Engineering Process coz have many many many Multicomponent + Multiphase + Reaction process.

But suitable for typical fluid flow model (and complicate depend on structure of model).

Now I order Fluent 6.0 and disappoint me coz I think Fluent 6.0 will can simulate my process But Fluent 6.0 does't have many new option better than Fluent 5.5 (In many typicle model 5.5 & 6.0 I think It is't different)

Or I have to go back to use Fluent 4.5?
  Reply With Quote

Old   July 4, 2002, 05:50
Default Re: CFB in Hot model with Fluent6.0
  #2
Greg Perkins
Guest
 
Posts: n/a
Until 6.1 comes later on 6.0 can't handle heat transfer etc in the Eulerian model - so yes stick with Fluent 4.5 since that's still the best for these applications.

You can do cold simulations, though - that's perhaps not satisfactory depending upon what you want from the model.

Greg
  Reply With Quote

Old   July 4, 2002, 06:15
Default Re: CFB in Hot model with Fluent6.0
  #3
Thitikorn
Guest
 
Posts: n/a
Em... Fluent 6.0 really can't suitable for Chemical process.

But Do u know why Fluent did't combine advantage of Fluent 4.5 in Fluent 6.0. Why we will can't simulate on only version and no confuse adout "What ver. I have to use?"

Now we have to collect program (Fluent or another) and we yet have to collect ver. (If u r novice I think it make very confuse)

O.K. I have to use Fluent 4.5 and also use UFS (I don't know why Fluent 4.5 use Absoft pro fortran. In my country (Thailand) I never hear Absoft pro fortran and It so hard for order from USA:~~( )
  Reply With Quote

Old   July 4, 2002, 08:37
Default Re: CFB in Hot model with Fluent6.0
  #4
Laika
Guest
 
Posts: n/a
Fluent 4.5 can only handle structured meshes.

Fluent 5 and 6 can handle unstructured meshes, but not all the models were implemented for the unstructured solvers. In the future all the models should be available on unstructured meshes...

hope this future is very near.

Laika, still orbiting
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
multiphaseInterFoam for RAS turbulence model chiven OpenFOAM Bugs 7 August 23, 2011 02:52
Superlinear speedup in OpenFOAM 13 msrinath80 OpenFOAM Running, Solving & CFD 17 August 22, 2009 03:59
multi fluid mixture model issue rystokes CFX 3 August 9, 2009 19:13
bubble model shahin.59 FLOW-3D 3 July 20, 2009 10:17
Advanced Turbulence Modeling in Fluent, Realizable k-epsilon Model Jonas Larsson FLUENT 5 March 13, 2000 03:27


All times are GMT -4. The time now is 15:54.