CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   FLUENT (https://www.cfd-online.com/Forums/fluent/)
-   -   Reading mesh files into Fluent from Gambit (https://www.cfd-online.com/Forums/fluent/30000-reading-mesh-files-into-fluent-gambit.html)

Prabhu.B July 8, 2002 16:17

Reading mesh files into Fluent from Gambit
 
When I read my mesh file into Fluent, it immediately gives me the following error,

Error: access: unbound variable Error Object: phase-domain?

and it also changes the names of the boundary condtions set in Gambit to some default names.

Can this be overcome?

Help much appreciated.

Thanks, Prabhu.B

Sohail July 9, 2002 10:57

Re: Reading mesh files into Fluent from Gambit
 
Prabhu I think you are not defineing your bounday types and boundary continnum in Gambit so define it first in Gambit and then export of Fluent. Hope this may work for you Regards Sohail

Prabhu July 9, 2002 19:35

Re: Reading mesh files into Fluent from Gambit
 
Sohail, I got all the boundary conditions and continnum types set in Gambit but still it gives me the same error when i read the file into Flunet. Any clue? Thanks, Prabhu


madasu July 16, 2002 06:39

Re: Reading mesh files into Fluent from Gambit
 
Hi Prabhu,

could you please be more clear....what boundary conditions and continum types you set in Gambit....

regards

madasu

Prabhu July 16, 2002 20:03

Re: Reading mesh files into Fluent from Gambit
 
Thank you for yr suggestions. I found out the reason for that error,

when I give names for the boundary conditions in Gambit, I should not leave any space between the words.

Suppose I want to give a name for a boundary coditions as Pressure Inlet, I should type as as Pressureinlet, if I leave a space between Pressure and Inlet then that gives me the error.

I don't know the reason, but it happens that way.


All times are GMT -4. The time now is 10:08.