# finding exact temperature....Urgent..

 Register Blogs Members List Search Today's Posts Mark Forums Read

 July 20, 2002, 00:07 finding exact temperature....Urgent.. #1 Puck Guest   Posts: n/a Dear all, Is there a way to find the temperature at a particular cell in the geometry drawn in gambit? Im trying to find the maximum temperature at an anuulus of a duct, where i have input volumetric heat generation. When i click at a certain point in the geometry after iteration, the results give me a range of values i.e (222, 224)..in this manner I was wondering whether there is any way i can find out the maximum temeperature in that particular annulus. Pls help..its urgent.. Thnks Kalai

 July 20, 2002, 01:19 Re: finding exact temperature....Urgent.. #2 david Guest   Posts: n/a If I understand your problem correctly: you want to find out the maximum temp of an unsteady case at a particular point, right ? Create a point there, write a file which will save the temp as a function of time as solution continues..View the file, you will know the max temp at that point within that time interval. DC

 July 20, 2002, 01:38 Re: finding exact temperature....Urgent.. #3 Puck Guest   Posts: n/a Hi.. Thnx for your prompt reply..But unfortunately mine is not unsteady flow.. Doi follow the same method?

 July 20, 2002, 03:49 Re: finding exact temperature....Urgent.. #4 david Guest   Posts: n/a If you have a steady state flow, why/how do expect Max temp at some point ??? !! Do you mean max temp during your iterations? Why do you need a max temp during your solution, it does not mean anything to me. If you really want to know, yes follow the same procedure and save the file for each iteration and check the temp vs iterations plot. DC

 July 21, 2002, 16:08 Re: finding exact temperature....Urgent.. #5 Karunakar Guest   Posts: n/a At the hot spot, create Iso-planes in horizontal and virtical directions using Plane and Iso-surface options in Fluent. This will show you the concentrated zone where you have high temperatures and by selecting few cells around it you can obtain the cell which has high temperature. Hope this will help you to some extent.

 July 22, 2002, 01:24 Re: finding exact temperature....Urgent.. #6 Ashu Guest   Posts: n/a Check maximum temperature on walls of the volumetric source by using report-> surfacei integral-> facet max ( temperature).

 Thread Tools Display Modes Linear Mode

 Posting Rules You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is OffTrackbacks are On Pingbacks are On Refbacks are On Forum Rules

 Similar Threads Thread Thread Starter Forum Replies Last Post Mihail CFX 7 September 7, 2014 06:27 atulverma FLOW-3D 1 May 14, 2009 12:39 Tim CD-adapco 3 June 29, 2008 18:12 yogesh FLUENT 0 February 22, 2005 01:58 Deadly FLUENT 3 September 3, 2002 08:43

All times are GMT -4. The time now is 15:02.