CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

GAMBIT help

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   August 2, 2002, 13:54
Default GAMBIT help
  #1
Mavinakere
Guest
 
Posts: n/a
Hi all, has anybody come across having split edges when you create volume.Intially when i have the surfaces,the edge is single and as soon as i make it volume i get a split edge in one of the surface.how can i avoid it?
  Reply With Quote

Old   August 3, 2002, 07:53
Default Re: GAMBIT help
  #2
Puck
Guest
 
Posts: n/a
im new to gambit also...But i was wondering how you make it into a volume with edges? in my case, i used edges,then formed a face(wireframe), then i drew another edge perpendicular to the face.. Use the face and the edge to "sweep face' in the volume command and u will get a volume.. I got a warning message saying faces arent connected but u can use the connect option to connect them..

I think this is the way..plz do keep me informed if u have a better method or if this method is wrong...

puck
  Reply With Quote

Old   August 3, 2002, 17:11
Default Re: GAMBIT help
  #3
Mavinakere
Guest
 
Posts: n/a
Well,I wouldn't say it wrong though..the way i make it is make edges where you need to have surfaces and the make a surface out of the edges in any possible way ie,sweep,closed edge surface,skin surface or any other method available.and then join all the surfaces to create a perfect volume.thats all i can think of. Mavinakere
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Gambit help: Cube inside cube Jack Martinez FLUENT 13 August 11, 2010 06:29
Gambit 2.3.16, Xming or Exceed...HELP! bambam3417 FLUENT 10 May 7, 2010 12:39
Does Gambit has a maximum allowable grid number? spartan1516 ANSYS Meshing & Geometry 7 March 25, 2010 10:08
Gambit -dev X11 doesn't work Ervin Amet FLUENT 0 October 28, 2007 09:33
Problem starting Gambit ViHAR MALViYA FLUENT 0 November 10, 2006 11:26


All times are GMT -4. The time now is 13:02.