VOF

August 5, 2002, 19:20

Is there any difference between the followings:

1) In Gambit creating ONE zone, importing the grid by fluent, marking a zone and patching that zone as a fluid2 and rest fluid1 (for VOF calculation)

2) In gambit creating 2 different zones and patching these two zones.

DC

August 6, 2002, 03:33

There is no difference, you can use both methods.

But be careful. If you make a register to patch (a region), then fluent will take a number of cells. Your region to patch can have a very strange shape if you have an unstructured mesh, or if the mesh does not follow the shape af the region you want to patch.

In a rectangular 2D-mesh, you cannot make a smooth circular region.

If this is of concern: use your second option.

Laika, still orbiting

August 6, 2002, 05:03

Laika, Thanks for your great and exact answer!! I was facing these situations and was in a dilema. DC

August 6, 2002, 07:31

glad I could help,

Laika, still orbiting

August 5, 2002, 19:20	VOF	#1
david Guest Posts: n/a	Is there any difference between the followings: 1) In Gambit creating ONE zone, importing the grid by fluent, marking a zone and patching that zone as a fluid2 and rest fluid1 (for VOF calculation) 2) In gambit creating 2 different zones and patching these two zones. DC

August 6, 2002, 03:33	Re: VOF	#2
Laika Guest Posts: n/a	There is no difference, you can use both methods. But be careful. If you make a register to patch (a region), then fluent will take a number of cells. Your region to patch can have a very strange shape if you have an unstructured mesh, or if the mesh does not follow the shape af the region you want to patch. In a rectangular 2D-mesh, you cannot make a smooth circular region. If this is of concern: use your second option. Laika, still orbiting

August 6, 2002, 05:03	Re: VOF	#3
david Guest Posts: n/a	Laika, Thanks for your great and exact answer!! I was facing these situations and was in a dilema. DC

August 6, 2002, 07:31	Re: VOF	#4
Laika Guest Posts: n/a	glad I could help, Laika, still orbiting

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
vof + hydrostatic pressure	ariorus	FLUENT	0	August 7, 2009 10:57
urgent query regarding vof model plz rply	Garima Chaudhary	FLUENT	0	July 13, 2007 02:20
ATTENTION!! Validty of Fluent's VOF??	ozgur	Main CFD Forum	3	February 18, 2004 18:19
ATTENTION!! Validty of Fluent's VOF??	ozgur	FLUENT	1	February 18, 2004 11:59
Difficult BCs about Freesurface Simulation by VOF	Yongguang Cheng	FLUENT	0	September 19, 2003 07:39